CROWN CE 2000 MADE IN U.S.A. AMPLIFICADOR DE POTENCIA PROFISSIONAL
R$ 2.400,00
TOP DE LINHA DA TECNOLOGIA AMERICANA
PRESENTE NO P.A. DE TODOS OS PALCOS PROFISSIONAIS DO MUNDO .
2000 WATTS rms !!!!!
POWER SEMI-NOVO, USADO SOMENTE EM ESTUDIO.
ESTA' COMPLETO, COM CAIXA ORIGINAL E MANUAL
CARACTERISTICAS :
Rugged and Lightweight Steel Construction
Operates in Dual or Bridge-Mono Modes
Rack-Mountable
Excellent Sound Reproduction with Low Distortion
Advanced Protection Circuitry Protects Against Overheating, Overloads, and Shorts
Switch-Mode Universal Power Supply
Wide Range of Speaker Impedances and Outputs
Backlit LCD
Integrated DSP
Ouput Power:
2-ohm Stereo (Per Channel): 975W
4-ohm Stereo (Per Channel): 660W
8-ohm Stereo (Per Channel): 400W
4-ohm Bridged-Mono: 1950W
8-ohm Bridged-Mono: 1320W
ESPECIFICAÇOES:
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) - 0,2 dB
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) >100 dB
Damping Factor (8 ohm): 10 Hz to 400 Hz > 400
Input Stage Input is electronically balanced and employs precision 1% resistors
AC Line Current CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A
At idle: Draws no more than 90 watts.
Crosstalk (below rated power) 20 Hz to 20 kHz > 55 dB
Input Impedance (nominal) 20 k ohms balanced, 10 k ohms unbalanced
Load impedance (note: safe with all types of loads):
Stereo - 2 , 4 e 8 ohms
Bridge mono - 4 e 8 ohms
Sensitivity (at 8 ohm rated output) 1.4V
Maximum Input Signal +22 dBu typical
Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V-240V, 50/60 Hz
Ventilation Flow-through ventilation from front to back
Cooling Heat sinks and proportional-speed fan
Dimensoes: largura, altura, profundidade - 48.3 cm x 13.34 cm x 31.11 cm
Peso : 18.28 kg